Purvigor Face Mask FFP3 / N99

- N99 grade face mask respirator, filters 99%.

- EN149:2001 A1:2009

- Meets WHO Coronavirus latest guidance to protect the respiratory system.

- Specialised material for high filter efficiency.

- Easy inhalation and inhalation.

In stock
SKU
SP5502
IF ORDERING 1 PACK, PLEASE ENTER NUMBER OF UNITS IN THE PACK
Pack Size: 10

(FFP3 equivalent) Face Mask

This face mask is a filtering mask, recommended when protection of the respiratory system is needed. N99 is equivalent to FFP3 and KN99 respirators.  

N99 grade meets the guidance from the World Health Organisation (WHO) for use during outbreaks of SARS, Avian Flu and Coronavirus.

- N99 grade face mask respirator, filters 99%.

- EN149:2001 A1:2009

- Meets WHO Coronavirus latest guidance to protect the respiratory system.

Face Masks (FFP3) for Coronavirus

- Specialised material for high filter efficiency.

- Easy inhalation and inhalation.

- Soft, flexible material.  

Is this type of face mask is good against the coronavirus, also known as the covid-19?  

The N99 face mask meets the guidance from the World Health Organisation (WHO). They are recommended for use by the WHO during outbreaks of SARS, Avian Flu and Coronavirus.  

This grade face mask offers the highest filtration level on the United States N scale.

 

Covid-19: should the public wear face masks?

"Yes"—population benefits are plausible and harms unlikely.  

When covid-19 became a global health emergency, there was a visible contrast between the responses of citizens in east Asia and the rest of the world. In east Asia, wearing of masks was ubiquitous, and sometimes mandated by governments. In Europe and North America, concerned citizens were repeatedly told that masks were not recommended for general use.

Now, increasing numbers of agencies and governments, including the Czech Republic and the US Centers for Diseases Control and Prevention1 are advocating that the general population wears masks.

 

Specification of the FFP3 mask

Mask category - N99 (FFP3)

Compliance standard - EN149:2001 + A1:2009

Particle filteration efficiency - 99%

Tested against particles size (microns) - less than 2

Protection against liquid and solid particles - Yes, inc bacteria and viruses

Instructions for use

For your safety, for correct and effective use of the apparatus, and to avoid hazards, it is essential to read and comply with the following recommendations:

Instructions for use

Any use of the flu respirator mask requires full understanding and strict observation of the operating instructions. The flu respirator mask may only be used for the purposes specified here.

- Open the bag. Take out the mask by hand and unfold it gently.

- Bend the nose clip to the shape of your nose.

- To fit the mask, use ear loops to secure around the ears.

- Adjust the mask so that it covers the nose and mouth, and place the nose clip on the nose bridge. Then adjust the mask go that the bottom of the mask is under your chin and the top part of the mask is secured at the top of the nose bridge. Make sure no air can pass through the outside edges of the mask. The efficiency of the mask and therefore your protection depend on the care taken when fitting the mask. With this in mind, you can adjust the fitting of the elastic bands for your personal comfort.

Conditions for use

- Before using this flu respirator mask, you must check that the mask corresponds to your needs in the specific environment of intended use. Failure to do so can put your health in danger, or even your life. Seek the advice of a professional (e.g. health and safety officer or doctor) to help you to define the protection you need.

- Failure to follow these instructions can harm your health, so please read them thoroughly and adhere to them.

- This mask does not produce oxygen, so it must be used in a sufficiently ventilated environment If the oxygen content of the air around you falls below 17%, you will quickly feel dizzy, have difficulty breathing, or even faint. If this happens, you must immediately return to a well-ventilated place to avoid further complications.

- Do NOT use this mask if you don't know the exact nature of any toxin you may encounter. In particular, the mask must not be used near explosive products or in explosive atmospheres.

- When fitting the mask, extra care should be taken by users who have facial hair or any facial irregularities. In these cases, take extra care to place the mask in such a way that no airways remain between the skin and the edges of the mask.

- Do NOT attempt to modify this mask: it has been designed and certified for your safety.

- This mask is intended for single use. After a maximum of 8 hours of continuous use, dispose of it. The mask will not regain its protective capacities after use.

- Keep the masks in an area with a maximum humidity level of 70%, and a temperature range of between -25°C and 40°C. The mask can lose its features and protective capacity after three years (see expiry date on the packaging), so it is risky to use this mask once the expiry date has passed. You are advised to dispose of any masks that have passed their expiry date.

- In any case and in spite of the whole care brought to this respiratory protective mask by the manufacturer, it is the user's responsibility (and in no case the manufacturer's responsibility) to ascertain the adequacy of the mask in relation to the environmental features where it will be stored and eventually be used. The manufacturer cannot guarantee a precise use length, considering its absence of knowledge of the environment in which the mask will have been stored since leaving the factory, and the features- of the environment in which will be used (temperature, pressure, humidity, concentration of filterable particles, user's facial structure...)

- This mask will protect you only if you follow these recommendations, as well as the instructions for use. Failure to use the face mask in accordance with this manual will reduce the effectiveness of the product.

More Information
Suggested Retail Price £4.99
Pack Size 10